Introduction; What's In The Box; Optional Battery Backup Installation; Connecting The Telephone Line Cords - Uniden FP1220 Owner's Manual

Lcd display caller id speaker phone
Table of Contents

Advertisement

INTRODUCTION

WHAT'S IN THE BOX?

Make sure your corded phone's packaging includes the following
items:
Handset with handset cord and phone base
Telephone line cord
Wall Mount Bracket
Owner's Manual
AC Adaptor
If any item is missing or damaged, contact your place
of purchase immediately. Never use damaged products!
NOTE

OPTIONAL BATTERY BACKUP INSTALLATION

Batteries may be used instead of the supplied AC Adaptor.
(The LCD and keypad backlight is available only when the AC
adaptor is connected.)
1.
Remove the battery cover from the back of your Caller ID
phone.
2.
Insert three 1.5V AAA size batteries by observing the +/-
polarity marks in the compartment.
3.
Replace battery compartment cover.
Based on ½ hour use per day, good alkaline batteries should last 2-3
months.
If using the AC Adaptor, batteries are not required for
normal operation.
NOTE
Always ensure that the telephone cord and AC adaptor
are disconnected before opening the battery compart-
ment door and installing batteries.
There is a risk of explosion if the battery is replaced by
an incorrect type. Dispose of used batteries according
to the instructions.
CONNECTING THE TELEPHONE LINE CORD
Plug one end of the telephone line cord into the telephone line
jack at the top end of the phone. Then plug the other end into
the telephone line wall jack.
5

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents