Preventing Window Fogging; Cabin Air Filter; Heated Seats; Entertainment Audio System Features - Chevrolet 2007 Cobalt Service Manual

Getting to Know Your Cobalt
10

Preventing Window Fogging

To keep the vehicle glass fog-free, turn
the airflow control knob to the Defog
( ) mode or the Defrost (
Recirculation will not function in these
modes, allowing outside air into the
vehicle to help reduce moisture.
See Section 3 of your Owner Manual.

Cabin Air Filter

Your Cobalt is equipped with a cabin air
filter that removes most of the common
allergens and pollutants from outside air,
such as dust and pollen, before they
reach the vehicle cabin.
The filter is located behind the glove
box. The glove box door must be
removed to access the filter from inside
the vehicle. See your Owner Manual for
scheduled maintenance and replace-
ment instructions.
See Section 3 of your Owner Manual.
Heated Seats (if equipped)
There is one heated seat control button
for each front seat located on the
instrument panel center stack below
the audio system.
I
(Low): Press the switch to this
position to turn the system on low.
II
(High): Press the switch to this
position to turn the system on high.
Press the button again to the center
position to turn off the heated seat.
See Section 1 of your Owner Manual.
ENTERTAINMENT
Audio System Features
) mode.
While most of the features on your radio
will look familiar, following are some that
may be new:
(Power/Volume): Press this knob to
turn the system on or off. Turn the knob
to adjust the volume.
(Information): Press this button to tog-
gle the radio display between station fre-
quency and time. If equipped, it will also
display additional text information related
to the current FM-RDS or XM station, or
MP3 song.
(Tune): Turn this knob to select radio
stations or, when a CD is playing, to
select a track or MP3 file.
Press the knob to display the tone con-
trol (bass/treble) or speaker control (bal-
ance/fade) setting. Press the pushbutton
under the desired label on the display.
Turn the knob to adjust the setting.
(Balance/Fade): Press this button,
or the Tune knob, to adjust the speaker
control. Adjust the setting using the Tune
knob, SEEK, FWD or REV buttons.
BAND: Press this button to switch to
FM1, FM2, AM, or XM1 and XM2 (if
equipped). With a CD loaded or a
portable audio player connected, press