Adjusting The Flash Output - Canon PowerShot G7X User Manual

● [ ]: Manual
● At ISO speeds other than [ ], an exposure level mark (4) based
on your specified shutter speed and aperture value is shown
for comparison to the standard exposure level (3). [ ] or [ ] is
displayed when the difference from standard exposure exceeds
2 stops.
● Calculation of standard exposure is based on the specified
metering method ( = 74).
● You can customize camera operation so that turning the [ ] ring
adjusts the shutter speed and turning the [
aperture value ( = 97).

Adjusting the Flash Output

Choose from the three flash levels in [ ] mode.
1
Enter [
Set the mode dial to [
z
2
Specify the flash mode.
Press the [
z
Settings] on the [
the [ ] button ( = 30).
Press the [ ][ ] buttons to choose
z
[Flash Mode], press the [ ][ ] buttons
to choose [Manual], and then press the
[ ] button.
3
Configure the setting.
Raise the flash, press the [ ] button and
z
immediately turn the [ ] ring to choose the
flash level, and then press the [ ] button.
Once the setting is complete, the flash
z
output level is displayed.
[ ]: Minimum, [
[ ]: Maximum
] dial adjusts the
Still Images Movies
] mode.
].
] button, choose [Flash
] tab, and then press
]: Medium,
● You can also set the flash level by accessing MENU ( = 30)
and choosing [ ] tab ► [Flash Settings] ► [Flash Output].
● You can also set the flash level in [ ] or [
accessing MENU ( = 30) and choosing [
] tab ► [Flash
Settings] ► [Flash Mode] ► [Manual].
You can also access the [Flash Settings] MENU screen ( = 30)
●
when the flash is up by pressing the [ ] button and immediately
pressing the [ ] button.
You can also access the [Flash Settings] MENU screen ( = 30)
●
by pressing the [ ] button and touching [
Before Use
] mode by Basic Guide
Advanced Guide
1
Camera Basics
2 Auto Mode /
Hybrid Auto Mode
3
].
Other Shooting Modes
4
P Mode
5
Tv, Av, M, and C Mode
6
Playback Mode
7
Wi-Fi Functions
8
Setting Menu
9
Accessories
10
Appendix
Index
95