Registering Other Web Services - Canon PowerShot G7X User Manual

8
Check the confirmation numbers
and complete the setup process.
Make sure the confirmation number on
z
the camera matches the number on the
smartphone or computer.
Press the [ ][ ] buttons or turn the [ ]
z
dial to choose [OK], and then press the
[ ] button.
Complete the setup process on the
z
smartphone or computer.
[ ] ( = 145) and CANON iMAGE
z
GATEWAY are now added as
destinations, and the [
to [ ].
A message is displayed on the
z
smartphone or computer to indicate that
this process is finished. To add other
Web services, follow the procedure
in "Registering Other Web Services"
( = 140) from step 2.
● Connections require that a memory card with saved images be in
the camera.
● Once you have connected to devices via the Wi-Fi menu, recent
destinations will be listed first when you access the menu. Press
the [ ][ ] buttons to access the device selection screen and
choose a device.

Registering Other Web Services

You can also add Web services besides CANON iMAGE GATEWAY to the
camera. Note that CANON iMAGE GATEWAY must be registered on the
camera first ( = 139).
] icon changes
1
Access the Web service settings
screen.
Follow step 1 in "Registering CANON
z
iMAGE GATEWAY" ( = 139) to log in
to CANON iMAGE GATEWAY, and then
access the Web service settings screen.
2
Configure the Web service you want
to use.
Follow the instructions displayed on the
z
smartphone or computer to set up the
Web service.
3
Choose [ ].
In Playback mode, press the [ ] button
z
to access the Wi-Fi menu.
Press the [ ][ ][ ][ ] buttons or turn
z
the [ ] dial to choose [
press the [ ] button.
The Web service settings are now
z
updated.
● If any configured settings change, follow these steps again to
update the camera settings.
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2 Auto Mode /
Hybrid Auto Mode
3
Other Shooting Modes
4
P Mode
5
Tv, Av, M, and C Mode
6
Playback Mode
7
Wi-Fi Functions
8
], and then
Setting Menu
9
Accessories
10
Appendix
Index
140