Vacuum Hose - Nautilus MX3-200 Operating Manual

5. Connection of Vacuum Hoses:
The vacuum connection port on the machine can be either a 2" hose barb or 2" male Flash Cuff. Both are
included with your MX3-200. The desired connector can be
threaded into the vacuum port on the front of the machine.
A 2" female Flash Cuff 1-1/2" hose adapter is also included
to connect the 1-1/2" vacuum hose to the 2" male Flash
Cuff on the machine.
A 2" hose cuff for 1-1/2" vacuum hose is included to
connect the 1-1/2" vacuum hose to the 2" hose barb on the
machine.
With the proper cuff attached to the 25' Vacuum Hose, the
25' vacuum hose is then connected to the vacuum
connection port on the MX3-200. The other end with the 1-
1/2" cuff is connected to the cleaning tool.
When ready to begin cleaning, turn both vacuum switches to
the ON position. If connected in series, the MX3-200 can be
operated with only one vacuum for cleaning delicate fabrics.
(See Vacuum Connection instructions on Page 8) In most
situations you will turn both vacuum switches ON.
Vacuum Hose Connection with standard barb
and vinyl cuff
Vacuum Hose Connection with Flash Cuffs
14