Vacuum Hose - Nautilus Extreme MXE-500 Operating Manual

5. Connection of Vacuum Hoses:
The vacuum connection port on the machine can be either a 2" hose barb or 2" male Flash Cuff. Both are
included with your Nautilus Extreme MXE-500. The desired connector can be threaded into the vacuum port
on the front of the machine.
A 2" female Flash Cuff 1-1/2" hose adapter is also included to connect the 1-1/2" vacuum hose to the 2"
male Flash Cuff on the machine.
A 2" hose cuff for 1-1/2" vacuum hose is included to connect the 1-1/2" vacuum hose to the 2" hose barb
on the machine.
With the proper cuff attached to the 25' Vacuum Hose, the 25' vacuum hose is then connected to the vacuum
connection port on the Nautilus Extreme MXE-500. The other end with the 1-1/2" cuff is connected to the
cleaning tool.
When ready to begin cleaning, turn both vacuum switches to the ON position. If connected in series, the
Nautilus Extreme MXE-500 can be operated with only one vacuum for cleaning delicate fabrics. (See
Vacuum Connection instructions on Page 8) In most situations you will turn both vacuum switches ON.
Vacuum Hose connection with standard barb
and vinyl cuff
Vacuum Hose connection with Flash Cuffs
14