Changing The Programme Sequence; Once A Programme Has Started; Changing The Programme; Cancelling The Programme And Then Selecting A Different Programme - Miele T 7644 C Operating Instructions Manual

Changing the programme sequence

Once a programme has started

- changing the programme

You cannot change to another pro-
gramme once a programme has started
(this prevents unintentional alterations).
You will need to cancel the current pro-
gramme before you can select a new
one.
- cancelling the programme and then
selecting a different programme
^ Press the Start/Stop button.
The items will be cooled down, de-
pending on the temperature reached
and how long they have been dried
for.
If you press the Start/Stop button
again during the cooling down pha-
se, Finish will light up in the display.
^ Switch the dryer off.
^ Switch the dryer on.
^ Select another programme and start
it.
- cancelling the programme and then
removing the laundry
^ Proceed as described in "Adding or
removing laundry after a programme
has started" below.
^ Switch the dryer off after closing the
door.
20

Altering Delay start

^ See "Delay start".
Adding or removing laundry
after a programme has started
^ Press the Door button.
^ Open the door.
,
Danger of burning:
Do not touch the back of the drum
when adding or removing items. The
drum and the items can get very hot.
^ Add or remove items as required.
^ Close the door.
^ Press the Start/Stop button.

Time remaining

The time left shown in the display may
now vary from the actual drying time.