Miele T 7644 C Operating Instructions Manual page 11

Display
The following are selected via the dis-
play:
– Delay start
– Duration of the Cool air and Warm air
programmes
– Programmable functions
The display also shows:
– Programme duration
– Programme stage
Drying
Cooling down
Finish
– Check and fault messages
Programme duration / Estimated time
remaining
When a programme is selected, the es-
timated duration (time remaining) will
appear in the display. Please be aware
that it is only an estimate!
The following factors all affect the esti-
mated time remaining: residual moistu-
re content after spinning; type of fabric;
size of load; room temperature; fluctua-
tions in power supply.
The electronics continually assess con-
ditions in the dryer and adjust the esti-
mated time remaining for a more accu-
rate reading. Because of this, the time
displayed can alter during the course of
a programme.
Operating the tumble dryer
In the same way, the Woollens handca-
re, Silks handcare and Smoothing pro-
grammes can finish earlier than expec-
ted if a certain temperature is reached.
This can happen with particularly fine
fabrics, very small loads or if items
were partly dry beforehand.
Delay start
The delay start time selected will appe-
ar in the display.
After the Start/Stop button has been
pressed, the delay start time will start
counting down.
Once the delay start time has elapsed,
the programme will begin and the esti-
mated programme duration will appear
in the display.
Programmable functions
The programmable functions can be
used to tailor drying programmes to suit
your individual requirements. In pro-
gramming mode, the display will show
the function selected.
11