Factory Settings - NETGEAR Nighthawk C7000 User Manual

Factory Settings

You can return the modem router to its factory settings. Use the end of a paper clip or a
similar object to press and hold the Reset button on the back of the modem router for at least
seven seconds. The modem router resets, and returns to the factory configuration settings
shown in the following table.
Table 2. Factory default settings
Feature
Modem router User login URL
login
User name (case-sensitive)
Login password (case-sensitive)
Local network LAN IP
(LAN)
Subnet mask
DHCP server
DHCP range
Time zone
DHCP starting IP address
DHCP ending IP address
DMZ
Time zone
Time zone adjusted for daylight
savings time
SNMP
Cable modem Inbound (communications coming
Firewall in from the Internet)
Outbound (communications going
out to the Internet)
Wireless Wireless communication
SSID name
Security
Broadcast SSID
Nighthawk AC1900 WiFi Cable Modem Router
Default behavior
www.routerlogin.com or www.routerlogin.net
admin
password
192.168.0.1
255.255.255.0
Enabled
192.168.0.2 to 192.168.0.254
Pacific time
Configured by the Internet provider
192.168.0.254
Disabled
As per the ISP/MSO ToD (Time of Day) Configuration
As per ISP/MSO ToD (time of Day) server configuration
Enabled
Disabled (except traffic on port 80, the HTTP port)
Enabled (all)
Enabled
See the product label
WPA2-PSK (AES)
Enabled
Supplemental Information
108