Remote Management - NETGEAR Nighthawk C7000 User Manual

2. Type http://www.routerlogin.net or http://www.routerlogin.com.
A login screen displays.
3. Enter the user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
The BASIC Home screen displays.
4. Select ADVANCED > Advanced Settings > Dynamic DNS.
5. Change your DDNS account settings as necessary.
6. Click the Apply button.
Your changes are saved.

Remote Management

The remote management feature lets you access your modem router over the Internet to
view or change its settings. You need to know the modem router's WAN IP address to use
this feature. For information about remote access using Dynamic DNS, see
page 89.
Note: Be sure to change the password for the user name admin to a secure
password. The ideal password contains no dictionary words from any
language and contains uppercase and lowercase letters, numbers,
and symbols. It can be up to 30 characters. See
Password

To set up remote management:
1. Launch an Internet browser from a computer or wireless device that is connected to the
network.
2. Type http://www.routerlogin.net or http://www.routerlogin.com.
A login screen displays.
3. Enter the user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
The BASIC Home screen displays.
Nighthawk AC1900 WiFi Cable Modem Router
on page 75.
Manage Your Network
91
Dynamic DNS
Change the admin
on