Table of Contents
Advertisement
7.
Enter the email address to which logs and alerts are sent in the Send to This E-mail
Address field.
This email address is also used for the From address. If this field is blank, log and alert
messages are not sent.
8.
If your outgoing email server requires authentication, select the My Mail Server requires
authentication check box.
a. In the User Name field, type the user name for the outgoing email server.
b. In the Password field, type the password for the outgoing email server.
9.
(Optional) Select the Send Alerts Immediately check box.
Email alerts are sent immediately when someone attempts to visit a blocked site.
10.
To send logs based on a schedule, specify these settings:
•
From Send logs according to this schedule drop-down list, select the schedule
type.
•
From the Day drop-down list, select the day.
•
From the Time drop-down list, select the time, and select the am or pm radio button.
11.
Click the Apply button.
Your settings are saved.
Logs are sent automatically. If the log fills up before the specified time, it is sent. After the
log is sent, it is cleared from the modem router memory. If the modem router cannot email
the log and the log buffer fills up, the modem router overwrites the log.
Nighthawk AC1900 WiFi Cable Modem Router
Control Access to the Internet
36
Hide quick links:
Advertisement
Table of Contents
