Panasonic BB-HGW700A Operating Instructions Manual page 89

IPsec Options Setup
It is possible to perform detailed IPsec connection settings. Usually they do not need to be modified.
You may need specialist knowledge when performing these settings.
Basic
ID
Domain Name
Own LAN Network
LAN Network
Set an ID indicating your identity. You can set an IPv6 Address or
Domain Name. If a Domain Name is set, set the Conversion Mode to
Aggressive.
When your ID is a Domain Name, set it here.
Select All or Specify packet source IP addresses. When All is
selected, the packets of all global addresses on the LAN side, are
encapsulated using IPsec. When Specify is selected, the packets of
specified global addresses on the LAN side, are encapsulated using
IPsec.
When Own LAN Network is set to Specify, set the source network
address (prefix) of the packets to be encapsulated.
[For assistance, please call: 1-800-272-7033]
Operating Instructions
89