Panasonic BB-HGW700A Operating Instructions Manual page 54

Network camera management system
Hide thumbs Also See for BB-HGW700A:
Table of Contents

Advertisement

Operating Instructions
MAC Address Filtering
PCs that are not registered with this product cannot connect to this product. On the LAN card of each
PC, a MAC address is registered, which is specific to that LAN card. If that MAC address is registered
in MAC Address Filtering, only the PC with that MAC address can connect. To check the MAC address
of your PC see Checking your PC's IP Address and MAC Address. (see page 123)
Note
See the Panasonic Support Website (http://panasonic.co.jp/pcc/products/en/netwkcam/) for more
details about Panasonic's wireless cameras.
MAC Address:
01:23:45:ab:cd:ef
1.
Click [MAC Address Filtering].
2.
Click Add under the Operation heading.
3.
Enter the MAC Address in the data entry field.
Enter two numbers or letters such as A-F
(a-f) each time, separated by a : (e.g.
01:23:45:ab:cd:ef).
4.
Click [Add].
5.
Check Enable under MAC Address Filtering.
6.
Click [Save].
7.
After checking the setting information, click
[Restart].
54
Registered MAC Address:
01:23:45:ab:cd:ef
Unable to Connect
MAC Address:
56:78:90:56:78:90

Advertisement

Table of Contents
loading

Table of Contents