Installing edge finishing kit (optional)
Whether used as a standalone unit or as a part of a video wall, the edge finishing kit will
transform your display into a most stylish and elegant display.
Inside your edge finishing kit you will find the following components:
Cosmetic Plates
Top (A)
Flat Enclosure (E)
Installation
For standalone unit
1. Mount the cosmetic plates in their
respective places on the edge of your
display, and screw in to place using the 6
mm M4 screws.
C
Bottom (B)
Corner Enclosure (F) M3 x 5 mm Screw (G) M4 x 6 mm Screw (H)
A
H
B
Left (C)
2. On each corner, mount a corner enclosure
piece and fasten each one with 4 of the 5
mm M3 screws.
D
Right (D)
G
Installing edge finishing kit (optional)
F
9