Control Cables; Recommended Options - Lincoln Electric POWER WAVE POWER WAVE WELDING SYSTEMS Brochure

LINC-NET TM

CONTROL CABLES

These come standard with both
bench and boom versions of the
Power Feed 10 and Power Feed 10
Dual wire feeders. The Linc-Net con-
trol cable has several advantages over
existing control cables:
• Common cable for all parts - The
same cable can be used between
the power source and wire feeder in
a bench system and between the
power source, control box and wire
drive in a boom system.
RECOMMENDED
OPTIONS
SPINDLE ADAPTER
For 14 lb. (6 kg) Innershield Coils
Permits 14 lb. (6 kg) Innershield
electrode coils to be mounted on 2"
(51mm) O.D. spindles. Order K435.
COIL ADAPTER
60 lb. Coil Adapter
Adapts 60 lb. Lincoln coils of
electrode to 2" (51mm) spindle.
Order K1504-1.
K1504-1
10
• Extension cord flexibility - These
control cables can be connected
end-to-end for length flexibility. A
single, custom length cable is no
longer needed.
• Extended lengths - These cables
can be connected up to 200 ft.
between any 2 components. This
allows more flexibility in locating the
power source and wire feeder.
Ordering Information:
Linc-Net Receptacles
Provides Linc-Net receptacles for
converting a Power Feed 10 bench
model to a boom model.
Order K1548-1.
READI-REEL ADAPTERS
30 lb. (14 kg) Readi-Reel Adapter
Adapts 22-30 lb. (10-14 kg) Lincoln
Readi-Reel coils of electrode to 2"
(51mm) spindle. Order K363P.
K363P
60 lb. (27.2 kg) Adapter
Adapts 50-60 lb. (22.7-27.2 kg)
Lincoln Readi-Reel coils of electrode
to 2" (51mm) spindle. Order K438.
Control Cable Only
K1543-8
K1543-16
K1543-25
K1543-50
K1543-100
Control and Weld Cables (4/0 size)
K1544-8
K1544-16
K1544-25
K1544-50
Plastic Wire Cover
Protects wire from dust and dirt and
provides electrical isolation.
For up to 44 lb. wire packages,
Order K1634-1.
For up to 60 lb. wire packages,
Order K1634-2.
Water Connection Kit
Includes quick connect fittings on
front and back of wire drive for use
with water-cooled guns and Magnum
Coolers. Kit provides for one gun.
Order K590-6.
Swivel Platform
Mounts to the lift bail on the power
source and bottom of the Power
Feed 10. Wire feeder may be lifted off
if needed. Compatible with Light Duty
Caster Kit. Includes "lazy susan" parts
tray. Order K1557-1. (Power Feed
10 only.)
K438
8 ft. cable length
16 ft. cable length
25 ft. cable length
50 ft. cable length
100 ft. cable length
8 ft. cable length
16 ft. cable length
25 ft. cable length
50 ft. cable length
K1557-1