Table of Contents
Advertisement
Q Q
3 7 6 3 1 5 1 5 0
SOUND FIELD CLEAR MODE
The preset sound field is cleared when this mode is activated. Use
this mode before returning the product to clients upon completion
of repair.
Procedure:
1. While pressing the [SOUND FIELD +] button, press the
to turn on the main power.
2. The message "S.F. CLR." appears and initialization is
performed.
RDS AUTOBETICAL MODE
Procedure:
1. While pressing the [INPUT SELECTOR] button, press the
button to turn on the main power.
2. The message "AUTO-BETICAL SELECT" appears and scans
and stores all the FM and FM RDS stations in the broadcast
area.
3. When done, the message "FINISH" appears.
FACTORY PRESET MODE
All preset contents are reset to the default setting.
Procedure:
1. While pressing the [SOUND FIELD --] and [PRESET TUNING +]
buttons, press the
button to turn on the main power.
I/1
2. The message "FACTORY" appears and the present contents
are reset to the default values.
FL CHECK MODE
All fluorescent segments are tested. When this test is activated, all
segments turn on at the same time, then each segment turns on one
after another.
T E
L
1 3 9 4 2 2 9 6 5 1 3
Procedure:
1. While pressing the [MUTING] and [PRESET TUNING --] buttons,
press the
button to turn on the main power.
I/1
2. All segments turn on.
3. Press the [INPUT SELECTOR] button.
4. Half of segments turn on.
5. Press the [INPUT SELECTOR] button once again.
6. Others half of segments turn on.
7. Press the [INPUT SELECTOR] button once again.
8. All segments turn off.
VERSION MODE
When this mode is used, the model, the destination and the software
version number are displayed.
Procedure:
1. While pressing the [SOUND FIELD +] and [PRESET TUNING --]
buttons, press the
button to turn on the main power.
I/1
2. The model, the destination and the software version number
appear.
KEY CHECK MODE
This mode is used to check the key.
Procedure:
1. While pressing the [MUTING] and [INPUT SELECTOR] buttons,
press the
button to turn on the main power.
I/1
2. The message "REST 06" appears.
3. Every pressing of any button other than the
down the buttons. The buttons which are already counted once
w w w
are not counted again.
4. When all buttons are pressed, the message "REST 00" appears.
STR-KS500
SECTION 3
TEST MODE
COMMAND MODE CHANGE MODE
The command mode of the remote commander can be changed.
Procedure:
1. While pressing the [SOUND FIELD +] and [INPUT SELECTOR]
buttons, press the
button to turn on the main power.
I/1
button
2. Either the message "C.MODE.AV 1" or "C.MODE.AV 2"
I/1
appears for a moment and select the desired mode.
SWAP ALL MODE
When this mode is used, output the audio signal of front L/R channel
to all channel.
Procedure:
1. While pressing the [PRESET TUNING +] and [MUTING] buttons,
I/1
press the
button to turn on the main power.
I/1
2. The message "SWP. ALL" appears.
PROTECTOR AUTO OFF MODE
When this mode is used, a protector on state is maintainable.
Procedure:
1. While pressing the [MUTING] and [SOUND FIELD --] buttons,
press the
button to turn on the main power.
I/1
2. The message "PLOT. EVER" appears.
ALL CLEAR MODE
All preset contents are cleared when this mode is activated. Use
this mode before returning the product to clients upon completion
of repair.
Procedure:
1. While pressing the [INPUT SELECTOR] and [PRESET TUNING +]
buttons, press the
button to turn on the main power.
I/1
2. The message "CLEARED" appears and the memories are reset
to the default values.
button counts
I/1
x
a o
y
.
i
http://www.xiaoyu163.com
8
Q
Q
3
7
6
3
u 1 6 3
.
7
7
http://www.xiaoyu163.com
2
4
9
9
8
1
5
1
5
0
8
9
2
4
m
c o
STR-KS500
2
9
9
9
8
2
9
9
Hide quick links:
Advertisement
Chapters
Table of Contents
