Sony STR-KS600PM Service Manual

STR-KS600PM/KS600PW
SERVICE MANUAL
Ver. 1.1 2006.03
• STR-KS600PM is the receiver section in HT-SF800M.
• STR-KS600PW is the receiver section in HTP-32SS.
This receiver incorporates Dolby* Digital and Pro
Logic Surround and the DTS** Digital Surround
System.
* Manufactured under license from Dolby
Laboratories.
"Dolby", "Pro Logic" and the double-D symbol are
trademarks of Dolby Laboratories.
** "DTS" and "DTS Digital Surround" are registered
trademarks of Digital Theater Systems, Inc.
Amplifier section
1)
Power Output
Models of area code CEL, CEK
(4 ohms 1 kHz, THD 0.7%)
2)
FRONT : 70 W/ch
2)
CENTER : 70 W
2)
SURR : 70 W/ch
(4 ohms 100 Hz, THD 0.7%)
SUB WOOFER
(4 ohms 1 kHz, THD 10%)
2)
FRONT : 100 W/ch
2)
CENTER : 100 W
2)
SURR : 100 W/ch
(4 ohms 100 Hz, THD 10%)
SUB WOOFER
1) Measured under the following conditions:
Area code Power requirements
CEL, CEK 230 V AC, 50 Hz
2) Depending on the sound field settings and the
source, there may be no sound output.
Inputs (Analog)
SA-CD/CD, VIDEO 1, 2 Sensitivity: 1 V
Impedance: 50 kiloohms
Sony Corporation
9-879-722-02
Home Audio Division
2006C05-1
Published by Sony Techno Create Corporation
© 2006.03
SPECIFICATIONS
Inputs (Digital)
DVD (Coaxial)
VIDEO 2, SA-CD/CD
(Optical)
Reproduction frequency range:
2)
: 70 W
Tone
Gain levels
FM tuner section
2) Tuning range
: 100 W
Antenna
Antenna terminals
Intermediate Frequency
AM tuner section
Tuning range
Models of area code CEL, CEK
With 9-kHz tuning scale: 531 - 1,602 kHz
Antenna
Intermediate Frequency
General
Power requirements
Sensitivity: –
Impedance: 75 ohms
Area code
Sensitivity: –
CEL, CEK
Impedance: –
Power consumption
Area code
28 – 20,000 Hz
CEL, CEK
±6 dB, 1 dB step
Power consumption (during standby mode)
Dimensions (w/h/d) (Approx.)
87.5 - 108.0 MHz
FM wire antenna
75 ohms, unbalanced
Mass (Approx.)
10.7 MHz
Design and specifications are subject to change
without notice.
Loop antenna
450 kHz
FM STEREO/FM-AM RECEIVER
AEP Model
STR-KS600PM/KS600PW
UK Model
STR-KS600PM
Power requirements
230 V AC, 50/60 Hz
Power consumption
110 W
0.3 W
430 × 64 × 337 mm
including projecting parts
and controls
3.3 kg
– Continued on next page –