Lincoln Electric CLASSIC III SVM 137-A Service Manual page 79

F-19
FIELD SHUNT WINDING TEST (continued)
TEST PROCEDURE
1. Turn engine off.
2. Unlatch, lift and secure the left side door.
Note that there are latches at both ends of
the door.
3. Locate and remove plug P10. See Figure
F.4.
TROUBLESHOOTING & REPAIR
FIGURE F.4 – PLUG P10 LOCATIONS
PLUG P10
Classic III and IIID
4. Locate the blue lead (U, pin 3) and the
brown lead (N, pin 5) in the harness plug.
See Figure F.5.
F-19