Table of Contents
Advertisement
F-16
6. Working from the left side of the machine,
measure the resistance across the rotor
slip rings.
a. Set the ohmmeter on the low scale (X1).
b. Place one meter probe on one of the
rotor slip rings. Place the other probe on
the other slip ring. See Figure F.2.
c. Check the resistance across the slip
rings. It should read approximately 41
ohms.
TROUBLESHOOTING & REPAIR
ALTERNATOR ROTOR TEST (continued)
FIGURE F.2 – MEASURING ROTOR RESISTANCE
Classic III and IIID
F-16
Advertisement
Chapters
Table of Contents
Troubleshooting
