Table of Contents
Advertisement
F-40
See Figure F.16 for steps 6 - 8.
6. With the 7/16" wrench, remove the two bolts,
nuts and washers mounting the brush holder
assembly to the stator frame.
7. Bend the flat washer away from the rotor lock-
ing nut.
"BENT"
WASHER
NUT
TROUBLESHOOTING & REPAIR
ALTERNATOR ROTOR REMOVAL
AND REPLACEMENT (continued)
FIGURE F.16 – ROTOR REMOVAL
SLEEVE
COLLAR
Classic III and IIID
8. With the 1-5/8" socket wrench, remove the
rotor locking nut, washer and sleeve collar.
NOTE: The sleeve collar will have to be removed
with a gear puller. Be careful not to damage the
rotor slip ring assembly. Remove the rotor by
pulling it free of the generator shaft.
STATOR
FRAME
BRUSH
HOLDER
ASSEMBLY
F-40
Advertisement
Chapters
Table of Contents
Troubleshooting
