Mounting The Bike Handle - Stihl FS 460 C-M K Instruction Manual

English

Mounting the Bike Handle

Mounting the bike handle with swiveling
handle support
1
2
The machine is supplied with the clamp
moldings (1) mounted to the
handlebar (2).
Mounting the control handle
Take out the screw (3) and remove
N
the nut (4) from the control
handle (5).
10
Line up the control handle (5)
N
relative to the handlebar (2): The
throttle trigger (6) must point toward
the gearbox and the clamp
screw (7) toward the engine.
3
5
4
5
6
2
7
8
2
5
4
8
Holding the control handle (5) in
N
that position, push it on to the end of
the handlebar (2) and line up the
holes (8).
Fit the nut (4) in the control
N
handle (5), insert the screw (3) and
tighten it down firmly.
Assembling the handle support
Assembly of the swivelling handle
support involves equipping the clamp
moldings with a spring and mounting
them on the handle support.
FS 460 C-M K
3