Lincoln Electric CLASSIC III 10033 Operator's Manual page 16

B-4
IMPORTANT: 1/2" clearance between the FLEXIBLE
HOSE and the fuel tank edge is required. Also 2"
clearance between FLEXIBLE HOSE and roof.
4. Reconnect negative battery cable.
FIGURE 2
A
A. FLEXIBLE HOSE
B. HEAT COLLECTOR SHIELD
C. AIR FILTER
NOTE: On welders received directly from the factory,
the "Deicing" kit is configured for "summer Seasons"
OPERATION
C
B
CLASSIC III AND IIID
B-4