HP SureStore Optical Jukebox 160ex Service Manual page 96

Table 4-2
Troubleshooting and Diagnostics
Recovery Procedures for Specific Hardware Errors
Hardware Errors Verification/Recovery
Error Code (hex)
4A
Test picker
4B
Switch active picker
4C
Restore picker
4D
Find translate home
4-22
Verification/Recovery Procedures
This may appear when testing for a
cartridge in the picker during an ISTAT.
Replace the picker.
1. Check for loose cables
2. Replace the picker.
1. Check for loose cables
2. Replace the picker.
Cannot translate the picker and/or sense
that it has moved.
1. Run FIND XLAT HOME test from the
control panel.
2. If the picker does not move at all, check
the connections on the umbilical cable.
If the connections are good and the
picker still does not move, change the
umbilical cable.
3. If the picker moves a little but does not
reach the side of the frame, the translate
motor on the picker is probably defective.
Change the picker.
4. If the picker moves properly to the side,
the translate sensor is probably
defective. Change the picker.
Chapter 4