HP SureStore Optical Jukebox 160ex Service Manual page 65

Operation and Configuration
Setting the SCSI IDs
If the new ID chosen results in the IDs for the jukebox controller and the
drives being more than one digit apart, the jukebox displays CONFLICT
and rejects the ID.
9. Press until READY displays.
CANCEL
CAUTION Turning off the jukebox in the next step could cause data loss if not done
correctly.
Do not turn off power to the jukebox until you are sure the SCSI bus is
inactive. Check the host system manuals for information about checking
the SCSI bus status.
10. Turn the jukebox OFF, then ON to save the IDs to the jukebox flash
ROM.
Chapter 3 3-19