Install Trim And/Or Surround - Heatilator CD4236-MOD Installation Manual

Figure 11.6 Rock Fixture Assembly Installed
THIS JIG MUST BE USED FOR THIS JIG MUST BE USED FOR
STONE PLACEMENT STONE PLACEMENT
• REMOVE BEFORE BURNING • REMOVE BEFORE BURNING
• DO NOT DISCARD • DO NOT DISCARD
REMOVE SCREW REMOVE SCREW
Figure 11.7 Remove Rock Fixture Assembly
BURNER
NO MEDIA ON
PILOT OPENING
(WHITE AREA)
Figure 11.8 Placement of Media
42 Heatilator • CD4236-MOD, CD4842-MOD Installation Manual • 2241-901 Rev. C • 6/15
BURNER
NO MEDIA ON
PILOT OPENING
(WHITE AREA)
Figure 11.9 Placement of Media
Figure 11.10 Proper Placement of Media
G. Install Trim and/or Surround
• Install optional trim kits and/or surrounds using the
instructions included with the accessory.
• Use non-combustible materials to cover the gap between
the sheet rock and the appliance (when applicable to the
model).