Table of Contents
Advertisement
b-2
"
RANGE" SWITCH
The "Range" switch is used to select one of four
amperage ranges with generous overlap for Stick/TIG
welding, or one Wire Feed welding range.
Process
Range Setting
STICK/TIG
90 Max.
(constant current)
145 Max.
(3 range settings)
225 MAX
WIRE FEED
(constant voltage)
15 to 25V
(1 range setting)
CAUTION
Never change the "RANGE" Switch setting while
welding. This will damage the switch.
------------------------------------------------------------------------
"
CONTROL" DIAL
Provides a fine welding current adjustment within the
Range Switch settings in the STICK mode and weld-
ing voltage control with the Range switch set in the
wire feed mode.
RANGER® 225 APPROXIMATE FUEL CONSUMPTION
Low Idle - No Load
2400 RPM
High Idle - No Load
3700 RPM
DC CC Weld Output
210 Amps @ 25 Volts
DC CV Weld Output
200 Amps @ 20 Volts
Auxiliary Power
9000 Watts
OPERATION
Current Range
40 to 90 Amps
70 to 145 Amps
120 to 225 Amps
Up to 200 Amps
23 H.P. COMMAND CH23S
RANGER® 225
KOHLER
.40 Gallons/Hour
(1.50 Liters/Hour)
.7 Gallons/Hour
(2.8 Liters/Hour)
1.3 Gallons/Hour
(4.9 Liters/Hour)
1.2 Gallons/Hour
(4.5 Liters/Hour)
1.4 Gallons/Hour)
(5.3 Liters/Hour)
b-2
Hide quick links:
Advertisement
Table of Contents
