LG WM2277H series Training Manual page 16

WM2277 WASHER
PEDESTAL, continued
5.
6.
7.
8.
PAGE 18 of 84
Depending upon the model, your
pedestal may have straight or
curved brackets. The curved
ones are to be used on the rear
positions when mounting a dryer
to a pedestal, but can also be
used in any other position on the
pedestal.
Holding the exposed adhesive
away from the appliance, insert
the screws and get them started.
Then press the brackets to the
appliance and tighten all the
screws. Rub the bracket from
side to side to ensure a
complete bond.
Use the wrench to turn each leg
of the appliance approximately
¼ turn to put a little pressure
between the appliance and the
pedestal. This will eliminate any
rattles.
If you are stacking the dryer on
top of the washer, it is usually
easier to set the pedestal and
washer into place and connect
the water and drain hoses
before placing the dryer on top.
TRAINING MANUAL