How To Edit A Berthing Line; How To Delete A Point Or A Line - Furuno GS-100 Operator's Manual

6. BERTHING DISPLAY
5. Enter the 1st position with the numeric keys. To change the coordinate, select "N"
or "E" then press one of keys from 0 to 9.
6. Move the cursor to [Enter] then press the ENT key.
7. Select [3 2nd Pos] or [4 3rd Pos] then press the ENT key. Enter the 2nd or 3rd
position as well as the 1st position.
Note: Enter each value so that the difference between two positions is less than
1°.
8. Select [1 Name] then press the ENT key.
9. Enter the name for a berthing line referring to step 5 at paragraph 3.9.3.
10. Move the cursor to [Enter] then press the ENT key.
11. Select [9 Enter].
Note: It is necessary to enter a name and at least two positions in order to register
a berthing line.
12. Press the MENU ESC key to close the setting window.
6.7.2

How to edit a berthing line

1. Press the MENU ESC key to open the main menu.
2. Select [7 System Setting] then [5 Berthing Line].
3. Select [1 List].
4. Select the berthing line to edit then press the ENT key.
5. Select an option to edit then press the ENT key.
6. Change the name or position as appropriate.
7. Select [9 Enter].
8. Press the MENU ESC key to close the setting window.
6.7.3

How to delete a point or a line

1. Press the MENU ESC key to open the main menu.
2. Select [7 System Setting] then [5 Berthing Line].
3. Select [1 List].
4. Select the berthing line to delete then press the ENT key.
6-12