Safety Instructions - Furuno GS-100 Operator's Manual

SAFETY INSTRUCTIONS

WARNING
CAUTION
Warning, Caution
Safety Instructions for the Operator
WARNING
Do not disassemble or modify
the equipment.
Fire, electrical shock or serious
injury can occur.
Turn off the power immediately if
water leaks into the equipment or
smoke or fire is coming from the
equipment.
Failure to turn off the equipment can
cause fire or electrical shock.
Contact a FURUNO agent for service.
Use the correct fuse.
A wrong fuse can cause fire or serious
damage to the equipment.
The TFT LCD is constructed using the latest LCD techniques, and displays 99.99% of its pixels. The
remaining 0.01% of the pixels may drop out or blink, however this is not an indication of malfunction.
ii
Indicates a condition that can cause death or serious
injury if not avoided.
Indicates a condition that can cause minor or moderate
injury if not avoided.
Prohibitive Action
About the TFT LCD
Mandatory Action
CAUTION
The glass of an LCD panel breaks
easily. Handle the LCD carefully.
Injury can result if the glass breaks.
Do not connect/disconnect the
signal cable while turning the
power on.
The unit may be damaged.
No single navigation aid (including
this unit) should ever be relied
upon as the exclusive means for
navigating your vessel.
The navigator is responsible for
checking all aids available to confirm
his position. Electronic aids are
intended to assist, not replace, the
navigator.