Lincoln Electric POWER FEED IM916 Operator's Manual page 32

b-14
Parameter
P.506 Set User Interface Passcode
Prevents unauthorized changes to the equipment. The default passcode is zero which allows full access.
A nonzero passcode will prevent unauthorized: changes to memory limits, saving to memory (if P.502 =
Yes), changes to setup parameters (if P.505 = Yes).
This parameter can only be accessed using Power Wave Manager software.
P.509 UI Master Lockout
Locks all user interface controls, preventing the operator from making any changes. This parameter can
only be accessed using Power Wave Manager software.
OPERATION
USER DEFINED PARAMETERS
Definition
POWER FEED™ 10M DUAL WIRE FEEDER
b-14