Sony Digital8 DCR-TRV410 Service Manual page 132

7. V-COM Level Adjustment (PD-106 board)
Set the common electrode drive signal level of LCD to the specified
value.
Mode Camera
Subject Arbitrary
Pin 4 of CN5501 (PANEL COM)
Measurement Point
Measuring Instrument Oscilloscope
Adjustment Page D
Adjustment Address 83
Specified Value A=5.20 ± 0.05V
Note : Perform "Bright Adjustment" and "Contrast Adjustment" before this
adjustment.
Adjusting method:
1) Select page: 0, address: 01, and set data: 01.
2) Select page: 3, address: 0C, set data: 60, and press the PAUSE
button of the adjustment remote commander.
3) Select page: 3, address: 22, set data: 02, and press the PAUSE
button.
4) Select page: D, address: 83, change the data and set the PANEL
COM signal level (A) to the specified value.
5) Press the PAUSE button.
6) Select page: 3, address: 22, set data: 00, and press the PAUSE
button.
7) Select page: 3, address: 0C, set data: 00, and press the PAUSE
button.
8) Select page: 0, address: 01, and set data: 00.
2H
Fig. 5-1-20.
8. Color Adjustment (PD-106 board)
Set the color saturation to the standard value. If deviated, the color
will be to dark or light.
Mode
Subject
Measurement Point
Measuring Instrument
Adjustment Page
Adjustment Address
Specified Value
Note : NTSC model : DCR-TRV410/TRV510
PAL model : DCR-TRV410E/TRV510E
Adjusting method:
1) Select page: 0, address: 01, and set data: 01.
2) Select page: 3, address: 0C, set data: 01, and press the PAUSE
button of the adjustment remote commander.
3) Select page: C, address: 95, set data: 10, and press the PAUSE
button.
4) Select page: C, address: 96, set data: 10, and press the PAUSE
button.
5) Select page: D, address: 8B, change the data and set the voltage
(A) between the white and green to the specified value.
6) Press the PAUSE button.
7) Select page: C, address: 95, set data: 20, and press the PAUSE
button.
8) Select page: C, address: 96, set data: 20, and press the PAUSE
button.
9) Select page: 3, address: 0C, set data: 00, and press the PAUSE
button.
A
10) Select page: 0, address: 01, and set data: 00.
White
A
5-37
Camera
Arbitrary
Pin 3 of CN5501 (VG)
External trigger : Pin 4 of CN5501
(PANEL COM)
Oscilloscope
D
8B
A=0.22 ± 0.05V (NTSC)
A=0.20 ± 0.05V (PAL)
Green
2H
Fig. 5-1-21.