Control Lockout - GE XL44 Use And Care & Installation Manual

Control Lockout

Your control will allow you to lock down the touch pads so they cannot be
activated when pressed.
1. Press the BAKE and BROIL HI/LO pads at the same
time for 2 seconds until the display shows "SF."
2. Press the SELF CLEAN pad. The display will show
"LOC OFF." If this is your choice, press START.
—Press the SELF CLEAN pad again. The display will
show "LOC." If this is your choice, press START.
3. When this feature is on and the touch pads are
pressed the control will beep and the display will
show "LOC."
NOTE: The control lockout mode will not affect the clock, timer and oven
light touch pads.
Fahrenheit or Centigrade Temperature Selection
Your oven control is set to use the Fahrenheit temperature selections but
you may change this to use the Centigrade selections.
1. Press the BAKE and BROIL HI/LO pads at the same
time for 2 seconds until the display shows "SF."
2. Press the BROIL HI/LO pad. The display will
show "F" (Fahrenheit). If this is your choice, press
START.
3. Press the BROIL HI/LO pad again. The display
will show "C" (Centigrade). If this is your choice,
press START.
Changing the Speed of the + or – Pads
As you use the + or – pads when setting a time or
temperature, you may notice the display changes
slowly. This special feature allows you to change
the speed.
To set the speed you prefer, follow the steps below.
1. Press the BAKE and BROIL
HI/LO pads at the same time
for 2 seconds until the display
shows SF.
2. Press the + pad. The display
will show you a set speed
between 1 and 5.
(on some models)
3. Press the + pad to increase the speed up to
the number 5.
3. Press the – pad to decrease the speed down
to the number 1.
4. Press START to activate the setting
and leave the control set in this special
features mode.
15