Control Lockout - GE JCSP31 Use And Care Manual

Control Lockout

Your control will allow you to lock down the touch
pads so they cannot be activated when pressed.
1. Press BAKE and BROIL HI/LO
BROIL
at the same time for 2 seconds
BAKE
HI/LO
until the display shows "SF."
2. Press SELF CLEAN. The
SELF
display will show "LOC OFF."
CLEAN
—Press SELF CLEAN again.
The display will show "LOC."
Fahrenheit or Centigrade Temperature Selection
Your oven control is set to use the Fahrenheit
temperature selections but you may change this
to use the Centigrade selections.
1. Press BAKE and BROIL HI/LO
BROIL
at the same time for 2 seconds
BAKE
HI/LO
until the display shows "SF."
2. Press BROIL HI/LO. The
BROIL
display will show "F"
HI/LO
(Fahrenheit).
Changing the Speed of the + or – Pads
As you use the + or – pads when setting a time or
temperature, you may notice the display changes
slowly. This special feature allows you to change the
speed. To set the speed you prefer, follow the steps
below.
1. Press BAKE and BROIL HI/LO
BROIL
at the same time for 2 seconds
BAKE
HI/LO
until the display shows "SF."
2. Press the + pad. The display
will show you a set speed
between 1 and 5.
16
SPECIAL FEATURES
OF YOUR OVEN CONTROL
(continued)
3. Press START to activate the control
lockout feature and leave the control set in
START
this special features mode.
When this feature is on and the touch pads are
pressed the control will beep and the display will show
"LOC."
NOTE: The control lockout mode will not affect the
clock or timer touch pads.
3. Press BROIL HI/LO again. The display
BROIL
will show "C" (Centigrade).
HI/LO
4. Press START.
START
3. Press the + pad to increase the speed up
to the number 5.
—Press the – pad to decrease the speed down
to the number 1.
4. Press START to activate the setting
and leave the control set in this special
START
features mode.