Waterproof Solution With Conduit - LevelOne FCS-3083 User Manual

Waterproof Solution with Conduit

This section describes the procedures to waterproof the cabling connections using the bundled
conduit gland and flexible conduit. This is the recommended if other input/output devices or an
external power adapter will be connected to the camera or when an exterior-grade Ethernet cable
is not available.
1. Prepare the following materials for waterproof installation:
Conduit Gland
(included in the camera package)
2. Disassemble the bundled conduit gland as shown below:
NOTE: In this installation, the conduit gland body can be securely attached to the mount kit;
therefore the use of lock nut is not necessary. Please set the lock nut aside.
Hardware Manual
Flexible Conduit
1/2" Trade size
(not included in the package)
Lock Nut
Body
17
Network Cable
CAT 5 or CAT 6
(not included in the package)
Sealing Insert
Clamping Nut