Software Installation 1. Please insert the CD-ROM which comes with LevelOne IP camera package. 2. Once inserted, the installation page would pop up. If no pop up is seen, please go to the CD-ROM directory and click on “AutoRun.exe”. 3. Click on “Install Software”...
Page 4
6. Click on “Finish” to complete the installation 7. Click on Installation Wizard icon on your Windows Desktop to launch the program. 8. Choose the IP Camera by MAC address and click “Link to selected device”.
Page 5
9. At initial login, a window would pop up asking user to install Active-X. Click “Yes” to proceed. 10. Install Active-X. 11. Once active-X is installed, the video stream of IP camera would be displayed on screen. The installation of wired connection of IP camera is completed at this point.
Page 6
3. Configure SSID, wireless mode and security parameters to match that of AP or router. 4. Press “save” button after configuration. 5. Unplug the power cord and RJ-45 Ethernet cable from the IP Camera. Then plug the power cord back in and LevelOne IP camera would automatically connect to the preset wireless service.
Page 7
IP CamSecure QIG Note: Please check LevelOne web site, www.level1.com, to see if any new version of IP CamSecure software is available. 1. Please insert the CD-ROM which comes with LevelOne IP camera package. 2. Once inserted, the installation page would pop up. If no pop up is seen, please go to the CD-ROM directory and click on “AutoRun.exe”.
Page 8
6. After successful installation, the software is accessible at Start Program s LevelOne IP CamSecure Main Console. 7. Launch the program and you would be asked for user name and password. For the first time, please enter: Username: admin Password: (any password you want) Confirm Password: (repeat the password just typed) 8.
Page 9
9. Go to Camera menu, and click on “Search”. All supported IP cameras available on network would be listed. 10. Select the desired IP camera by checking the box on the left and enter the user name and password for that IP camera. 11.
Page 10
12. Click “OK” to return to main console screen. If more than one IP cameras are added, you can use the circled icons to change display pattern to view multiple IP cameras simultaneously.