Toshiba RAS-10SAVP-E Service Manual page 90

Toshiba ilmalämpöpumppujen myynti, huolto ja asennus: Jäähdytinpalvelu RefGroup Oy, Vantaa
No. Part name

Front panel 4) Push "PUSH" part under the front panel
5) Remove the front panel fixing screws.
6) Push the electric parts box with the right
<How to assemble the front panel>
1) Push three center positions and two lower center positions of the air outlet, and
2) Insert the electric dust collector and left and right air filters.
3) Tighten two screws.
Procedures
and remove hooks of the front panel from
the installation plate.
Installation plate
Front panel
Push
(2 pcs.)
thumb while pulling the both sides of the
front panel toward you.
Holder Holder
then hang the hanging hooks (4 pcs.) at the top side of the front panel to the rear
plate.
Push in the electric dust collector until the protrusions on both sides are completely
inserted into the holders.
If installation is incomplete, the FILTER indicator (orange) may light.
• Incomplete hanging or incomplete pressing may cause a dewdrops or generation
of a fluttering sound.
www.ilmalämpöpumput.com
Electric dust Electric dust
collector collector
Electric dust Electric dust
collector collector
Protrusion Protrusion
– 90 –
Remarks
Pull here Pull here
Push here Push here
Push here Push here
Holder Holder
Protrusion Protrusion