2 Hardware
2.1 Rear Panel Connections
LABEL
1.
DSL
2.
LAN 1..4
3.
POWER
After you've made the connections, connect the power adaptor to a power supply and
push in the power button to turn on the Prestige.
The PWR/SYS LED blinks while performing system testing and then turns steady on if
the testing is successful. A LAN LED turns on if a LAN port is properly connected.
Prestige 660W/HW
Figure 1 P660HW Hardware Connections
Table 1 Prestige Rear Panel Description
Connect to a telephone jack using the included phone wire.
Connect to a computer/external hub using an Ethernet cable.
Connect to a power source using the power adaptor for your region
(see your User's Guide).
DESCRIPTION
4