Hardware; Chapter 2 Hardware; Overview; Leds (Lights) - ZyXEL Communications NR/FWA Outdoor Series User Manual

2.1 Overview

This chapter describes the physical features and their usages of the Zyxel Device.

2.2 LEDs (Lights)

The LED indicators on your Zyxel Device show current status and/or signal strength of the Zyxel Device.
Note: The LEDs are off if the Zyxel Device is not receiving power.

2.2.1 Zyxel Device Model with Single LED

Figure 4 NR7101 LED
The following are the Zyxel Device's LED descriptions.
Table 3 NR7101 LED Behavior
COLOR
Green
Amber
Red
Green/Amber/Red
STATUS DESCRIPTION
On The Zyxel Device is connected to the Internet.
Blinking The Zyxel Device is trying to connect to the Internet.
On The WiFi is activated. The Zyxel Device is connected to the Internet.
Blinking The WiFi is activated. The Zyxel Device is not connected to the Internet.
On The Zyxel Device is not connected to the Internet.
Blinking The Zyxel Device is booting or self-testing.
Off There is a system failure.
Looping Firmware upgrade is in progress.
NR/FWA Outdoor Series User's Guide
23
C
H A P T E R

Hardware

2