Settings Menu - Epson EH-TW570 User Manual

List of Functions

Settings Menu

Submenu
You can correct keystone distortion.
Keystone
• When H/V-Keystone is selected:
Adjust V-Keystone and H-Keystone to correct horizontal
and vertical keystone distortion.
You can also set H-Keystone Adjuster and Auto V-
Keystone to On or Off.
• When Quick Corner is selected:
Select and correct the four corners of the projected image.
s "Quick Corner"
Switches to split screen projection.
Split Screen
s "Projecting Two Images Simultaneously (Split Screen)"
p.48
You can use this to restrict operation of the projector's control
Control Panel
panel.
Lock
s "Restricting Operation (Control Panel Lock)"
Function
p.40
p.73
Submenu
Pointer Shape You can select the shape of the pointer.
Pointer 1:
Pointer 2:
Pointer 3:
s "Pointer Function (Pointer)"
You can adjust the volume. Setting values are saved for each
Volume
source.
Remote Receiver You can limit the reception of the operation signal from the
remote control.
When set to Off, you cannot perform any operations from the
remote control. If you want to make operations from the remote
control, hold down the [Menu] button on the remote control for
at least 15 seconds to reset the setting to its default value.
You can select and assign an item from the Configuration menu
User Button
with the remote control's [User] button. Pressing the [User]
button directly displays the assigned menu item selection/
adjustment screen, allowing you to make one-touch changes to
settings/adjustments. You can assign one of the following items
to the [User] button.
Power Consumption, Info, Progressive, Test Pattern,
Resolution, 3D Format, Display the QR Code
You can display a test pattern to adjust the projection without
Test Pattern
connecting other equipment when you set up the projector.
While the test pattern is displayed, zoom, focus adjustments, and
keystone correction can be performed. To cancel the test pattern,
press the [Esc] button on the remote control or the control panel.
Attention
If a pattern is displayed for a long time, a residual
image may be visible in projected images.
88
Function
p.66