Saving A User's Logo - Epson EH-TW570 User Manual

Projection Functions
a
• When any pair of adjacent [
pressed at the same time, the pointer can be moved diagonally.
• If the mouse button settings are set to reverse on the computer, the
operation of the remote control buttons will also be reversed.
• The Wireless Mouse function does not work under the following
conditions.
- When projecting images from a device connected to the
HDMI/MHL port using an MHL cable.
- When the Configuration menu or a Help screen is displayed
- When operating functions other than the Wireless Mouse function
(such as adjusting the volume)
However, when using the E-Zoom or Pointer function, the page up
or down function is available.

Saving a User's Logo

You can save the image that is currently being projected as a User's Logo.
a
• Once a User's Logo has been saved, the logo cannot be returned to
the factory default.
• If the content of the Configuration menu is set from another
projector using the batch setup function, the registered User's Logo
is set for the other projectors. Do not register confidential
information and so on as the User's Logo.
s "Performing Batch Setup for Multiple Projectors"
], [ ], [ ], or [ ] buttons are
p.100
a
Project the image you want to save as the User's Logo, and then
press the [Menu] button.
"Operating the Configuration
s
Using the remote control
b
Select User's Logo from Extended.
69
Menu"p.82
Using the control panel