Notes On Operating The Network Menu; Soft Keyboard Operations - Epson EH-TW570 User Manual

List of Functions
Submenu
Net. Info. - Wire‐ Displays the following network setting status information.
• Connection Mode
less LAN
• Wireless LAN system
• Antenna Level
• Projector Name
• SSID
• DHCP
• IP Address
• Subnet Mask
• Gateway Address
• MAC Address
• Region Code
Displays the QR code.
Display the QR
Code
Network Config‐ The following menus are available for setting Network
items.
uration
Basic, Wireless LAN, Security, Mail, Others, Reset, and
Setup complete
* Displays available region information for the Wireless LAN unit being used.
For more details, contact your local dealer or the nearest address provided in
the Epson Projector Contact List.
Epson Projector Contact List
s
a
• By using a Web browser of a computer connected to the projector
on a network, you can set functions and control the projector. This
function is called Web Control. You can easily enter text using a
keyboard to make settings for Web Control such as Security settings.
s "Changing Settings Using a Web Browser (Web Control)"
p.75
• Contact your network administrator for details on network settings.
Function
*

Notes on operating the Network menu

Selecting from the top menu and sub menus, and changing selected items is
the same as making operations from the Configuration menu.
When done, make sure you go to the Complete menu, and select Yes, No,
or Cancel. When you select Yes or No, you are returned to the
Configuration menu.
Yes: Saves the settings and exits the Network menu.
No: Does not save the settings and exits the Network menu.
Cancel: Continues displaying the Network menu.

Soft keyboard operations

The Network menu contains items that require input of alphanumerics
during setup. In this case, the following software keyboard is displayed.
Press the [ ][ ][ ][ ] buttons on the remote control or the [
[ ][ ] buttons on the control panel. Use the buttons to move the cursor to
a b
the desired key, and then press the [
character. Enter figures by holding down the [Num] button on the remote
control, and pressing the numeric buttons. After inputting, press Finish on
the keyboard to confirm your input. Press Cancel on the keyboard to cancel
your input.
91
][
w v
] button to enter the selected
]