Intellimute - Cobra XRS 9540 Operating Instructions Manual

10216_XRS9540_PH2.qxd 8/7/07
Detection
Your Detector
Strobe and Safety Alert Signals, Voice and Visual Displays
Type of Signal Voice
3M Opticom or Tomar* Emergency Vehicle Approaching Emergency Vehicle
Emergency Vehicles Emergency Vehicle Approaching Emergency Vehicle
Road Hazards Road Hazard Ahead
Trains Train Approaching
* Your detector provides 360˚ detection of this signal.
Strobe Alert Display Emergency Alert
(Flashing) Signal Detected
Emergency... Emergency...
Spectre 1 Alert Signal, Voice and Visual Display
Type of Signal Voice
Spectre Spectre Alert
Spectre 1 Alert Signal
Detected
Spectre1
VG-2 Alert Signal, Voice and Visual Display
Type of Signal Voice
Interceptor VG-2 VG-2 Alert
VG-2 Alert Signal
Detected
VG2
16 English
1:28 PM Page 9
Visual Display
Road Hazard
Train
Road Hazard Alert Train Alert Signal
Signal Detected Detected
Road Train
Hazard
NOTE
There are different tones for each Safety Alert.
Visual Display
Spectre1
NOTE
There are different tones for each alert.
Visual Display
VG2
NOTE
There are different tones for each alert.
Settings
Your Detector

IntelliMute

IntelliMute is a unique new feature that allows you to avoid alerts you
don't need to hear because you are stopped or moving slowly. By sensing
the "revs" (RPMs) of your engine, IntelliMute knows when you are at low
speed and automatically mutes alerts (except for strobe signals from
emergency vehicles).
Before IntelliMute will work, you must set an activation point for your engine's
revs (see page 11). Whenever the revs are below that point, IntelliMute will
begin muting. The activation point will be stored in memory and recalled
each time the power is turned on. The factory setting is IntelliMute off.
NOTE
IntelliMute may not work with some vehicles because it cannot sense
the engine's revs. In such cases, you can reduce unwanted audio alerts
by using Auto Mute and City mode when appropriate.
IntelliMute On
i h
IntelliMute Button
Press and release
To Turn IntelliMute On
Press and release
Tone Voice
the IntelliMute
Two beeps IntelliMute On
button.
To Turn IntelliMute Off
Press and release
Tone Voice
the IntelliMute
One beep IntelliMute Off
button again.
Visual Display
i
appears in
the display
Visual Display
None
Nothing Comes Close to a Cobra ® 9