Voice/Tone Setting - Cobra XRS 9540 Operating Instructions Manual

10216_XRS9540_PH2.qxd 8/7/07
Settings
Your Detector

Voice/Tone Setting

You can set your detector to sound alerts with either a Voice
or a Tone. You can change settings by using the Mute button.
In Voice Alert mode, you will first hear several tones, then a
voice message announcing the type of signal detected, followed
by more tones. In Tone Alert mode, you will hear the tones only.
The factory setting is Voice Alert mode.
Mute Button
Press and hold for
two seconds
To Change From Voice Alert to Tone Alert
While no signal
Tone
is being detected,
One beep
press and hold
the Mute button for
two seconds.
To Change From Tone Alert Back to Voice Alert
While no signal
Tone
is being detected,
None
press and hold
the Mute button
for two seconds
again.
VG-2, Spectre 1 Alert Settings, K & Ku Band Detection
The detector is undetectable by police VG-2 and Spectre 1 radar detector
detectors and will alert you when such a device is in use near your vehicle.
During the alert, the unit continues to detect other signals. You can choose
whether or not you want your unit to show VG-2 and Spectre 1 alerts.
The factory setting is VG-2 and Spectre 1 alert Off. (See table on the next page.)
12 English
1:28 PM Page 12
Voice Visual Display
Tone Alert None
Voice
Visual Display
Voice Alert None
Settings
Your Detector
Spectre 1 and VG-2 On
Spectre1
& VG2
Dim Button
On
Press and hold for two seconds
To Turn VG-2 and Spectre 1 Alerts On and Off
While no signal
Tone Voice
is being detected,
On = Two Beeps Spectre VG-2 On
press and hold the
Dim button for four
seconds.
Off = One Beep Spectre VG-2 Off
Radar Alert Settings
The detector allows you to choose whether it will show alerts on the X, K,
and Ku bands. The factory settings are: X Band and K Band On; Ku Band Off.
To Turn X Band On and Off
While no signal is
Tone Voice
being detected, press
X On = Two beeps X On
and hold both the Dim
and Mute buttons for
four seconds.
X Off = One beep X Off
To Turn K Band On and Off
While no signal is
Tone Voice
being detected, press
K On = Two beeps K On
and hold both the
Mute and City buttons
for four seconds.
K Off = One beep K Off
To Turn Ku Band* On and Off
While no signal is being Tone Voice
detected, press and
Ku On = Two beeps Ku On
hold the City button
for four seconds.
Ku Off = One beep Ku Off
Spectre 1 and VG-2 Off
Spectre1
& VG2
Off
Visual Display
V will blink twice
in the display
V will blink once
in the display
Visual Display
X will blink twice
in the display
X will blink once
in the display
Visual Display
K will blink twice
in the display
K will blink once
in the display
Visual Display
X and K will blink
twice in the display
X and K will blink
once in the display
Nothing Comes Close to a Cobra ® 13