10216_XRS9540_PH2.qxd
8/7/07
Settings
Your Detector
Muting an Alert
Your detector allows you to quickly turn off an audio Alert by momentarily
pressing the Mute button. If you press the Mute button a second time
during the Alert, the audio Alert will be turned back on.
Auto Mute Mode
Auto Mute will automatically reduce the audio volume of all alerts
after four seconds for as long as the signal is detected. The factory
setting is Auto Mute on.
Mute Button
Press and release
To Turn Auto Mute On
Press and release
Tone
the Mute button
Two beeps
again while no
alert is occurring.
To Turn Auto Mute Off
Press and release
Tone
the Mute button
One beep
while no alert
is occurring.
8
English
1:28 PM
Page 8
Voice
Visual Display
Auto Mute On
None
Voice
Visual Display
Auto Mute Off
None
Detection
Your Detector
Instant-On Detection
Your detector is designed to detect Instant-On speed monitoring signals,
which can suddenly appear at full strength.
NOTE
You should take appropriate action
immediately whenever an instant-on alert is given.
Responding to Alerts
Description
Interpretation
Tone repeats slowly at
Probably police radar
first, then speeds up
rapidly.
Tone sounds one
Probably a false alarm,
time only.
but possibly pulsed radar,
Spectre 1 or VG-2 nearby
Tone instantly begins
Radar, Spectre 1 or VG-2
repeating rapidly.
nearby has been activated
suddenly
Tone repeats slowly as you
Probably police
approach a hill or bridge,
radar beyond the
then speeds up sharply as
hill or bridge
you reach it.
Tone repeats slowly
Probably a false alarm
for a short period.
Any type of laser alert.
Laser alerts are
never false alarms
Any Safety Alert
You are nearing an
or Strobe Alert.
emergency vehicle,
railroad crossing,
or road hazard
(construction,
accident, etc.)
Recommended
Response
FULL ALERT
Exercise caution
FULL ALERT
FULL ALERT
Exercise caution
FULL ALERT
Exercise caution
Nothing Comes Close to a Cobra
®
17