Remote Condenser - Scotsman C1448R Installation And User Manual

C1448, C1848, C2148 D Series
Remote Condenser Models - User Manual

Remote condenser

The condenser fins will need to be cleaned.
Push and release the Off button. Wait until the
machine stops.
Note: Lock out the controller or the ice machine power
supply to prevent an unauthorized fan motor restart.
If there is imbedded grease, use a commercial coil
cleaner to wash out the grease. Dust can be blown
out with compressed air from the inside or use a
vacuum cleaner and soft brush. Be careful not to
damage the condenser's fins. Use a fin comb to
straighten any bent fins.
Exterior Panels
The front and side panels are durable stainless steel.
Fingerprints, dust and grease will require cleaning
with a good quality stainless steel cleaner.
Water filters
If the machine has been connected to water filters,
check the cartridges for the date they were replaced
or for the pressure on the gauge. Change cartridges
if they've been installed more than 6 months or if the
pressure drops too much when the ice machine fills
with water.
December 2014
Page 21