Troubleshooting - Lincoln Electric COMMANDER 500 Operator's Manual

Lincoln electric welder user manual
Hide thumbs Also See for COMMANDER 500:
Table of Contents

Advertisement

E-2
Observe all Safety Guidelines detailed throughout this manual
PROBLEMS
(SYMPTOMS)
Major Physical or Electrical Damage
is Evident.
Engine will not "crank".
Engine will "crank" but not start.
Engine shuts down shortly after
starting.
Battery does not stay charged.
If for any reason you do not understand the test procedures or are unable to perform the tests/repairs safely, contact your Local
Lincoln Authorized Field Service Facility for technical troubleshooting assistance before you proceed.

TROUBLESHOOTING

POSSIBLE AREAS OF
MISADJUSTMENTS(S)
ENGINE PROBLEMS
1. Contact your Local Lincoln
Authorized Field Service Facility.
1. Battery is low. Charge Battery.
2. Loose battery cable connections.
Inspect, clean and tighten.
1. Out of fuel. Fill fuel tank.
2. Fuel shut off valve is in off
position.
3. High oil temperature (Indicator
light lit. Check engine cooling
system. (Consult engine service
dealer.
4. Low battery voltage.
1. Low fuel. (Indicator light lit K1585-
2 only) Add fuel.
2. Low output of battery charging
alternator. (Indicator light lit)
Check
belt.
cooling blower
Replace if neccessary.
3. High oil temperature (Indicator
light lit). Check engine cooling
system. (Consult engine service
dealer.
1. Faulty battery. Replace
CAUTION
COMMANDER 500
RECOMMENDED
COURSE OF ACTION
Contact your Local Lincoln Authorized
Field Service Facility for technical
troubleshooting assistance.
E-2

Advertisement

Table of Contents
loading

Table of Contents