Adjusting The Viewfinder Position; Adjusting The Viewfinder Angle; Lifting Up The Viewfinder Barrel And Eyepiece - Sony PMW-350K Operating Instructions Manual

2
Couple the viewfinder connector to the
VF connector (26-pin).
VF connector (26-pin)
Detaching the viewfinder
You can detach the viewfinder by following the
attaching procedure in reverse order, but there is
an additional action to take: when detaching the
viewfinder from the fitting shoe, pull up the
stopper.

Adjusting the Viewfinder Position

To adjust the viewfinder left-to-right position,
loosen the left-to-right positioning ring, and to
adjust the front-to-back position, loosen the front-
to-back positioning knob.
Viewfinder left-to-right positioning ring
Viewfinder front-to-back positioning knob

Adjusting the Viewfinder Angle

You can adjust the angle of the viewfinder.
To reverse the display (image/text indication)
vertically
The viewfinder can be rotated as much as 180
degrees toward the direction facing the subject.
When you do this, the picture and other
information displayed in the viewfinder appear
upside down. To restore the normal display, set
the MIRROR switch on the rear panel of the
viewfinder to B/T.
Lifting Up the Viewfinder Barrel
and Eyepiece
You can view the LCD screen inside the
viewfinder or its mirrored image by lifting up the
viewfinder barrel or the eyepiece.
This section describes how to lift up the
viewfinder barrel and detach it. The eyepiece can
also be lifted up and detached in the same way.
LCD screen
Attaching the Viewfinder 33