Sony PMW-350K Operating Instructions Manual page 140

Assignable switch
setting
Histogram
Lens Info
Zoom Tele/Wide
Zoom Wide/Tele
Manual Focus Assist
Focus Mag
Zebra
Lens RET
a)
Return Video
Return Video2
Return Video3
Return Video4
Shot Mark1
Shot Mark2
OK Mark
Color Temp SW 3200K Adjust the white balance with a 3200K preset value.
Color Temp SW 4300K Adjust the white balance with a 4300K preset value.
Color Temp SW 5600K Adjust the white balance with a 5600K preset value.
Color Temp SW 6300K Adjust the white balance with a 6300K preset value.
Electrical CC
140 Assigning Functions to Assignable Switches
Function
Turn the histogram display on or off.
Switch the depth of field indication between off, displayed
in meters, and displayed in feet.
When a lens that supports serial communication is
installed, assign the Zoom Tele function to ASSIGNABLE
4, and assign the Zoom Wide function to ASSIGNABLE 5
(displayed only when <4> and <5> are set).
When a lens that supports serial communication is
installed, assign the Zoom Wide function to ASSIGNABLE
4, and assign the Zoom Tele function to ASSIGNABLE 5
(displayed only when <4> and <5> are set).
Turn the manual focus assist function on or off.
Turn the focus magnification function on or off.
Turn zebra display on or off.
Display return video signals when the optional CBK-CE01
is installed and a camera extension unit is connected.
When a camera extension unit is not connected, function as
follows.
During recording or playback: Write a shot mark.
In the other states: Conduct a recording review
(if playback is allowed).
Display return video signals when the optional CBK-CE01
is installed and a camera extension unit is connected.
For future system extension. Currently not works.
For future system extension. Currently not works.
For future system extension. Currently not works.
Write Shot Mark1.
Write Shot Mark2.
Add or delete an OK mark.
Function that switches the electrical CC filter (3200K/
4300K/5600K/6300K) applied to white balance adjustment
values.
Each press of the switch or button switches in the order
3200Kt4300Kt5600Kt6300K.
These can also be applied from a menu (apply with
Electrical CC<A><B><C><D>).
Note
This function is not available when White Filter >ND Filter
C.Temp in the Maintenance menu is set to On.
If you set ND Filter C.Temp to On after assigning the function,
the assignable switch ceases to function.
State when camcorder
is next powered on
Setting retained
Setting retained
—
—
Setting retained
Setting not retained
Setting not retained
—
—
—
—
—
—
—
—
Setting retained
Setting retained
Setting retained
Setting retained
Setting retained