Maintenance; Periodic Maintenance - Lincoln Electric PRINCE IM818 Operator's Manual

S D M
ECTION
P
Maintenance of the torch will normally consist of a general cleaning of the
wire guide system, including tubes, drive rolls, and conduits at regular inter-
vals.
Remove spatter build-up from inside of nozzles with a hardwood stick.
The only parts on the Prince
conduit, contact tips, gas cups, barrel liners, drive and idler rolls. A supply of
these parts should be maintained on hand.
If repairs do become necessary, qualifi ed shop maintenance personnel can
easily replace any part.
Your Cobramatic System is designed to provide years of reliable service.
Normal wear and component failure may require occasional service.
The number of units in operation and the importance of minimal "down time"
will determine to what extent spare parts should be stocked on hand. See the
"Recommended spare parts list" for the most commonly replaced parts.
AINTENANCE
M
ERIODIC AINTENANCE
Tool
Gas Valve Removal Tool
Contact Tip Removal Tool
Drive Roll Removal Tool
Prince XL ® - Owner's Manual - Page 12
®
XL that are subject to normal wear are the
Maintenance Tools
MK P/N
931-0584
931-0002
931-0100