Lincoln Electric PRINCE IM818 Operator's Manual page 18

PA-G1 S G C
POOL UN ONTROL
P/N 005-0264
This Generic Torpedo is designed to hook-up to
CV power supplies that supply an auxiliary 26 VAC
@ 1.7 amps and uses a closing contact signal.
The unit is supplied with bare wires that must be
connected to the power supply. Some examples
of power supplies that can be hooked-up are:
Lincoln SP-250, 255 & Wirematic 250 & 255
Beta-Mig 200 & Beta-Mig LF
Airco Dip-Pak 200, 225 & 250
ESAB (L-TEC) / M M
IG ASTER
P/N 005-0206
An amphenol adaptor cable and gas/power lug
are all that is needed to connect to the Migmaster.
Adaptor kit includes everything needed.
M M 250 & V
ILLER ATIC INTAGE
P/N 005-0205
This easy to install, plug in module fi ts the Millermatic
250, Miller Vintage machine, or Hobart Betamig 2510.
It and a Prince Spool Gun are all that is needed to get
your customer up and running.
P G 260
ANASONIC UNSLINGER
P/N 005-0617
Easy to install adapter cable using Gunslinger speed
control.
ESAB M M 251
IG ASTER
P/N 005-0624
A panel kit plugs directly into the front of the
MigMaster 251 and includes everything that is
needed to interface the spool gun.
M M 250X
ILLER ATIC
P/N 005-0629
Easy to install adapter cable using MillerMatic 250X
speed control.
F 250
ABRICATOR
P/N 005-0689
Easy to install adapter cable using MillerMatic 250X
speed control.
Prince XL ® - Owner's Manual - Page 11
- G
ENERIC
250
/ H B M 2510
OBARTS ETA IG
Spool Gun Control - Generic
ESAB (L-Tec-Linde) MigMaster 250
MillerMatic 250, Vintage and BetaMig 2510
Panasonic Gunslinger 260
ESAB MigMaster 251
MillerMatic 250X
Fabricator 250